China 3-Phase Fully Automatic Intelligent Static Voltage Regulator Manufacturer

100Kva-2000Kva 3-phase fully automatic intelligent static voltage regulator with overcurrent protection

ZBW 3-phase fully automatic compensation voltage regulator is designed to automatically maintain the output voltage and ensure stable operation when the power grid fluctuates or the load changes. Compared with traditional voltage regulators, this series of products has significant advantages such as large capacity, high efficiency, no waveform distortion, high voltage regulation accuracy, etc. It is suitable for all types of loads, can withstand instantaneous overloads, and has the ability to operate continuously for a long time.
In addition, this static voltage regulator supports smooth switching between manual and automatic control modes, and has a full range of protection functions, including overvoltage, overcurrent, phase loss/phase sequence error, delay and fault protection. The voltage regulator is small in size, light in weight, easy to install, stable and reliable in performance, and is widely used in the industrial field.

Features:

High-quality isolation transformer: H-class insulation material is used to ensure long-term stable operation.
The input switch comes from industry-leading brands such as Chint or optional Schneider to ensure high performance and reliability.
High efficiency: The maximum efficiency can reach 99%, which effectively saves energy.
Three-phase regulation: Provide independent or subordinate three-phase regulation to meet different load requirements.
Strong overload capacity: It can withstand 200% overload within 5 seconds and 150% overload within 1 minute to ensure safe and stable operation of the equipment.
Low energy loss: Reduce power waste and improve overall efficiency.
Comprehensive protection functions: Including overvoltage protection, overcurrent protection, phase loss/phase sequence error protection, delay protection and fault protection to ensure that the equipment is protected from power fluctuations and abnormal conditions.
Manual bypass: Red copper material is used to ensure higher durability and better electrical contact.
Remote control: Remote control is achieved through RS232 or RS485 interface (optional) for easy management and monitoring.
Protection level: IP23 (NEMA 2) for indoor use, IP54 (NEMA 3R) or IP65 for outdoor use, to meet the needs of various environments.
Highly customized design: According to customer needs, flexible customization options are provided to meet the specific requirements of different scenarios and equipment.

Voltage stabilizer block diagram

150kva-ac-automatic-voltage-regulator-3-phase

three-phase-ac-automatic-voltage-regulator

Specification

Input Voltage range	Three phase 304V-456V , for wider range can be customized
Frequency	50Hz/60Hz
Related voltage	Line voltage 380V
Voltage regulation accuracy	±(1-7)% selectable (± 2.5% high precision)
Response time	<10ms
Stable schedule	≤ 100ms
Waveform distortion	Not generate additional waveform distortion(static)
Effectiveness	50KVA and below ≥97%, Above 50KVA ≥99%
Three-phase unbalance	Three-phase point voltage automatic balance
Delayed output	Regulate first, then output(protect the device from shock)
Overpressure	Output phase power is higher than 10%(245)
Under voltage	Output phase power is less than 10%(195)

Input
Input voltage	220V/380V,230V/400V,240V/415V etc or other voltage accepted
Phase	3P+N+G or 3P+G option
Input range	±20%(±15%~±60%) can be customized
Input frequency	47Hz-63Hz
Input switch	Chint Brand switch(ABB,Schneider option)
Output
Output voltage	220V/380V,230V/400V,240V/415V etc or other voltage accepted
Phase	3P+N+G or 3P+G option
Output accuracy	±1%-±5%(factory setting 2%)
Output Frequency	50Hz/60Hz (LCD display will be identify automatc 50 or 60Hz)
Power factor	0.8 or 0.9,1 option( general AVR 0.8)
Waveform distortion	No distortion(same as input waveform)
Efficiency	≥98%(on full load)
Overload capacity	150% for 5 minutes,200% for 1 minute
Response time	<10ms
THD	<3%(linear load)
General
Compensation transformer	Insulation H level,200 degree
Control method	Compensation regulation or Independent regulation for each phase (option)
Working principle	Full automatic ,servo motor/SCR/IGBT
IP level	IP21(indoor), IP54 or IP65(Outdoor)
Cooling	Air cooling/ Fan system
Environment
Woking temperature	-20° to +50°(if high teperature in your city,please inform us)
Ralative humidity	<90%
Noise	45db@70% load,55db@100%load (within one meter)
Altitude	<1500m
LCD display
Display	5.0 LCD digital dispaly
LCD display show	Input Phase to netural
	Input phase to phase
	Output phase to neutral
	Output phase to phase
	Load Current in each phases(press button to switch )
	Frequency (50 or 60hz autoamtic indentify show)
	Working temperature
Function
Normal functions	Malti-protect fuction,over voltage/under voltage protection,over current protection,over load protection,saty start protection,manual bypass protection,short circuit protection,lack of phase protection,wrong sequence protection,indicate alarm,over temperature protection.

Application

CNC machine tools, laser cutting equipment
Medical equipment, electronic testing equipment
Industrial automation systems
Power and electrical equipment
Power transmission systems, metallurgical equipment, etc.