TNS 15kva-120kva China Industrial 3 Phase Auto Voltage Stabilizer

Product Features

♦ High-precision voltage stabilisation: Precise voltage regulation is achieved through the autocoupled regulator and servo motor, and the voltage stabilisation accuracy is as high as 380V ±3%, ensuring the smooth operation of all kinds of equipments.
♦ High efficiency: the efficiency of this series of products is higher than 95%, and no additional waveform distortion, load power factor is 0.8.
♦ protection function: with over-voltage, under-voltage, time-delay protection function, can be configured according to the needs of more safety protection measures to ensure the safe and stable operation of equipment.
♦ Simple operation: three-phase ammeter and voltmeter indicate the output current and voltage of each phase respectively, which is easy to monitor the power status.
♦ Reliable: the equipment has a low temperature rise design, stable operation for a long time and reliable performance.

Instructions for use

♦ Power connection: Connect the input end of the voltage stabilizer to the power supply and the output end to the power-using equipment, and make sure that the zero and earth wires are connected correctly.
♦ Check the voltage: make sure the rated voltage of the instrument and equipment is the same as the output voltage of the voltage regulator, and select the input voltage switch correctly.
♦ Fuse protection: If the fuse is blown, verify the load equipment and replace the fuse with the same specification, do not use non-standard wires or fuses.
♦ Environmental requirements: Install in a dry, well-ventilated place to avoid moisture and dust affecting equipment operation.

Technical Parameters

Model NO.	TNS6
Capacity	15KVA   20KVA   30KVA   40KVA   50KVA   60KVA  80KVA   100KVA   120KVA
Phase	Three phase
Input voltage	AC 260-450V or customized
Output voltage	AC 380V or customized
Frequency	50Hz/60Hz
Precision	±3%
Work efficiency	>95%
Control type	Servo motor
Digital display	Show input and output voltage
Protection	Over/Under Voltage, Over Load, Short Circuit, Over Temperature
Ambient temperature	-10°C~+ 40°C
Noise level	≤50dB

Specifications

MODEL	Input voltage	Output voltage	Measurement(mm) Length*Width*Height
TNS6-15KVA	260V~450V	380V±3%	320*490*525
TNS6-20KVA			320*520*490
TNS6-30KVA	304V~456V		415*470*880
TNS6-40KVA			415*470*880
TNS6-50KVA			450*560*1200
TNS6-60KVA			450*560*1200
TNS6-80KVA			540*620*1350
TNS6-100KVA			540*620*1350
TNS6-120KVA			540*620*1350

Product analysis

Operating conditions

♦ Operating temperature: -10℃ ~ +40℃, the average temperature within 24 hours does not exceed 35℃.

♦ Relative humidity: ≤ 90%, higher humidity is allowed under high temperature to avoid condensation on the surface of the equipment.

♦ Installation altitude: no more than 2000 metres.

♦ No violent vibration or shock, and avoid using in the environment with explosive risk.

♦ Indoor use: the device should be used in a place where there is no wind or snow intrusion and no corrosive gas.

Scenario range of use

TNS three-phase voltage stabilizers are widely used in a variety of industrial and commercial settings, including:

♦ Industrial automation equipment

♦ Production line control systems

♦ Medical equipment (e.g. X-ray machines, laboratory instruments)

♦ Communication systems

♦ Computer networks and data centres

♦ Lighting systems

♦ Air-conditioning equipment, chillers, TV and sound systems, etc.