TSAJA Oil-immersed stabilizer

The oil immersed regulator consists of pressure regulating transformer (including fuel tank, stator, rotor top cover, transmission control motor M, hand wheel mechanism and control circuit board voltage regulation is realized by motor drive or hand regulation secondary line components). Rotary pressure wheel mechanism and gear coupling. The rotation range is within 180°, and the electric… Continue reading TSAJA Oil-immersed stabilizer

Products description

The oil immersed regulator consists of pressure regulating transformer (including fuel tank, stator, rotor top cover, transmission control motor M, hand wheel mechanism and control circuit board voltage regulation is realized by motor drive or hand regulation secondary line components). Rotary pressure wheel mechanism and gear coupling. The rotation range is within 180°, and the electric SS limit and mechanical limit are provided at the upper end of the fuel tank. The electric SS limit is used to cut off the motor power by the travel switch. The mechanical limit is blocked by a protective bolt to limit its rotation limit. The stator winding and the rotor winding are fixed by the bottom frame and placed in the oil tank. The tank is equipped with 10# transformer oil. When the load generates heat, it is cooled by the oil immersion cooling method. It has the characteristics of wrong phase, lack of phase, overpressure and overcurrent protection; main circuit has no contact adjustment, no mechanical wear, no spark, no interference, low failurerate, etc.; and strong impact resistance, transient overload capacity, use Long life and no maintenance.

Main feature

● Output voltage accuracy
The control board uses precision logic circuits and precision components. In harsh environments, it can output with the
most accurate voltage. The accuracy is within 380V±(1~3%), which can be set freely.
● No step voltage adjustment (brushless)
Inductive, non-contact at the load voltage, linear boost step-down adjustment.
● Excellent characteristics
The Japanese high magnetic rate silicon steel sheet is used, and the no-load loss and the no-load current are minimized.
Make the regulator the highest performance and reduce power loss.
● Excellent capacity and overload capacity
The regulator can be 100% loaded, continuous use and can pass 2-3 times of current in an instant without damaging the unit.
● Rugged and long-lasting
The internal body is a non-carbon brush and other components and components in the inductive voltage regulator IVR,
which is never worn, and is characterized by durability.
● Easy maintenance and maintenance
With modular design, all parts are standardized. Simply keep the interior clean and do not require any special maintenance.
● Suitable for large capacity
Inductive single machine can be used for models over 1600KVA.

Input voltage304V-456V
Output voltage380V
frequency50Hz
Specification10、20、30、50、75、100、120、150、200、250、300、350、400、500、600、700、800、
1000、1250、1600、2000、2500、3200、3600KVA
Dielectric strength200V/60S﹤10MA
Insulation resistance>20MΩ
effectiveness98%
Voltage regulation accuracy±3%
Waveform distortion<3%
Ambient temperature-5℃~40℃
Contrast humidity<95%
Temperature rise<55℃
Voice<65dB
Protective functionOver/under voltage, phase sequence, overcurrent, overload
Leave a message

    To know more our LED drivers/power supplies/LED transformers, pl. send email to us, we will reaply you soon.

      Tags :

    Related Product
    TSAJA Oil-immersed stabilizer

    TSAJA Oil-immersed stabilizer

    The oil immersed regulator consists of pressure regulating transformer (including fuel tank, stator, rotor top cover, transmission control motor M, hand wheel mechanism and control circuit board voltage regulation is realized by motor drive or hand regulation secondary line components). Rotary pressure wheel mechanism and gear coupling. The rotation range is within 180°, and the electric… Continue reading TSAJA Oil-immersed stabilizer

    One-stop shop for customised voltage stabilizer
    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

      Way to contact us.
      • Address :

        555 Station Road, Liu Shi Town, Yueqing City, Wenzhou City, Zhejiang Province, China

      • Contact number :

        Tel : +86-15967739233

        Whatsapp :

      • Email us :

        Email : sales@zhengxi1983.com

        Skype :

      Copyright © Zhejiang Zhengxi Electric Group Co., Ltd..All Rights Reserved. Technical:zhengxi1983.com / Sitemap / XML

      Friendly Links :

      zhengxidianqi
      Welcome to ZHENGXI

        To know more our Voltage Stabilizer/Transformer/Regulator, pl. send email to us, we will reaply you soon.

        Home

        Products

        About

        Contact

        We use cookies to ensure that we give you the best experience on our website. To learn more, go to the Privacy Page.