Why does a welding machine need to use a voltage stabilizer?
Improve production efficiency: reduce equipment failure, decrease downtime, and ensure the continuity of production.
Ensure the quality of welding: stable welding current and prevent the defects caused by voltage fluctuations in the process of welding.
Protect devices: overload, overvoltage, and undervoltage can be protected to extend the service life of the device.
Technical Parameters
| Model NO. | TNS6 |
| Capacity | 15KVA 20KVA 30KVA 40KVA 50KVA 60KVA 80KVA 100KVA 120KVA |
| Phase | Three phase |
| Input voltage | AC 260-450V or customized |
| Output voltage | AC 380V or customized |
| Frequency | 50Hz/60Hz |
| Precision | ±3% |
| Work efficiency | >95% |
| Control type | Servo motor |
| Digital display | Show input and output voltage |
| Protection | Over/Under Voltage, Over Load, Short Circuit, Over Temperature |
| Ambient temperature | -10°C~+ 40°C |
| Noise level | ≤50dB |
Specifications
| MODEL | Input voltage | Output voltage | Measurement(mm) Length*Width*Height |
| TNS6-15KVA | 260V~450V | 380V±3% | 320*490*525 |
| TNS6-20KVA | 320*520*490 | ||
| TNS6-30KVA | 304V~456V | 415*470*880 | |
| TNS6-40KVA | 415*470*880 | ||
| TNS6-50KVA | 450*560*1200 | ||
| TNS6-60KVA | 450*560*1200 | ||
| TNS6-80KVA | 540*620*1350 | ||
| TNS6-100KVA | 540*620*1350 | ||
| TNS6-120KVA | 540*620*1350 |
Product analysis
① Metal housing |
① Metal Case |
When selecting a voltage stabilizer for a welding machine, in addition to considering the power demand, input voltage range, response speed and protection function of the welding machine, special attention should be paid to the starting power of the welding machine. Generally, the selection of the voltage stabilizer recommends a three-fold amplification based on the maximum power at the start of the welding machine to ensure that the voltage stabilizer can handle the high power load at the start of the welding machine. For example:
Model TNS15kVA-50kVA: Suitable for small and medium-sized welding machines with a starting power between 5kVA and 15kVA.
Model TNS60kVA-120kVA: Suitable for high-power welding equipment with a starting power between 20kVA and 40kVA.
Choosing a voltage stabilizer in this way can ensure its stable operation and avoid affecting the welding quality or damaging the equipment due to excessive load or unstable voltage
EN 
DE 
ES 
FR 
RU 
PT 
IT 
JA 
DA 
PL 
NL 
TR