Single Phase Heat Treatment Isolation Transformer with Competitive Pricing

A single-phase dry-type isolation transformer provides solid electrical isolation between the power supply and sensitive equipment. The transformer is dry-type (oil-free) for inherent safety and low maintenance. High-quality materials and advanced construction – such as vacuum-pressure impregnation and segmented high-temperature baking – are employed to create long service life and durability. Integral shielding and filtering reject interference: filtering harmonics and reducing electrical noise, it provides clean, stable power. It enhances equipment safety and performance in a wide range of industrial and commercial applications at a competitive price by isolating input and output circuits.

Key Features

Galvanic Isolation: Fully isolates primary and secondary windings to block ground faults and surges
Low Distortion Output: Tight winding tolerances and electrostatic shielding minimize waveform distortion and noise
High Thermal Insulation: Class F insulation (155 °C hot-spot) standard, with optional Class H (180 °C) materials for extreme-duty applications
Heavy-Duty Overload: Can sustain 150% of rated load for 60 seconds and 200% for 30 seconds without damage
Quiet, Rugged Design: Laminated core and low-loss construction keep audible hum and vibrations low, extending service life.
Flexible Configuration: Available in multiple voltages, tap settings and enclosures; compliant with CE/UL/IEC safety standards for easy integration.

Technical Specifications

Parameter	Specification
Phase	Single-phase (1ϕ)
Capacity Range	0.5–30 kVA (various models)
Input Voltage	220 / 230 / 240 VAC (±10%)
Output Voltage	115 / 120 / 230 / 240 VAC (selectable)
Voltage Accuracy	±5% (at full load)
Voltage Regulation	±5–6% (no-load to full-load)
Waveform Distortion	<1% total harmonic distortion
Insulation Class	Class F (155 °C) standard; optional Class H (180 °C)
Frequency	50/60 Hz
Overload Capacity	150% rated current for 60s; 200% for 30s
Insulation Resistance	>100 MΩ (500 V DC)
Dielectric Strength	2× rated voltage, 60 seconds (primary–secondary)
Design Life	≥20 years (typical in normal use)
Operating Temperature	0 °C to +40 °C (ambient)
Relative Humidity	0–95% (non-condensing)
Applicable Standards	IEC 60076-11, UL 5085-3, CE mark, RoHS

Material Summary

Core: Cold-rolled silicon-steel laminations (low-loss core material).
Winding: Copper conductors with Class-F insulation (often triple-insulated enamel).
Insulation: High-temp epoxy and varnish system rated Class F (155 °C), optional Class H (180 °C).
Terminals: Heavy-duty screw or clamp connectors for secure input/output connections.
Housing: Rugged steel enclosure (ventilated or sealed, with optional IP rating) for industrial environments.